QSR 1.1 Reference configurations for HW testing

QSR 1.1 hardware tests must support all the reference configurations that were used in QSR 1.0 hardware testing.

QSR 1.0 Quality assurance requirement 6.6 defines the following reference configurations for HW test environment:

• System level testing must also be done on real hardware environment using at least following reference configurations (HW + OS). Relevant official OS versions are to be used.
  • iMX6 + QNX
  • Intel NUC + QNX
  • Renesas H3 + Integrity
  • Qualcomm 820 + Integrity

In the HW testing, only the following reference configuration were available (see https://doc.qt.io/QtSafeRenderer/qtsr-supported-environment.html#reference-target-devices):

• Boundary Devices BD-SL-i.MX6 Development Board with QNX 7.0
• Renesas R-CarD3 with Green Hills Software INTEGRITY 11.4.4
• Intel NUC with QNX OS for Safety 2.0

These must be used also for QSR 1.1 HW testing.

QSR 1.x Requirement specification is available in the QSR Sharepoint:

https://qtcompany.sharepoint.com/:w:/r/sites/QtQuality/_layouts/15/Doc.aspx?sourcedoc=%7B8AF9AB9A-22D1-4490-8B79-69FE6DBDE0C2%7D&file=Qt_Safe_Renderer_Requirement_Specification.docx&action=default&mobileredirect=true