Strange debugger behaviour - CDB, Windows 7 x32

Qt Creator 2.7.0
MSVC 2010 32-bit

I am unable to debug any Qt GUI Application.

The sample application is:

============================= main.cpp ==========================
#include "mainwindow.h"
#include <QApplication>

int main(int argc, char *argv[])
{
    int i=0;	 // BREAKPOOINT HERE <----
    for(int i=0;i<4;++i)
    {
        i+=3;
    }
    QApplication a(argc, argv);
    MainWindow w;
    w.show();
    
    return a.exec();
}
=================================================================
Generate new empty Qt GUI application and edit Main.cpp to look like this
(just added some C loop to test if I can debug BEFORE Qapplication, and I am!)

What I did:

Attempt 1: Hit Debug.
CDB starts... and fastly stops on the line 
		QApplication a(argc, argv);
		
Continue, step, nothing works!

Attempt 2:

Set a breakpoint to int i=0;
Hit Debug.
CDB starts and hits the breakpoint. Step, step, step... all okay
step till 
		QApplication a(argc, argv);
and it traps here, in  "KiFastSystemCallRet" at ntdll
I can't jump and can't even past after the QApplication line - it's just trapped!
I can't debug my project anymore.

======================= THE CALL STACK =======================

0	KiFastSystemCallRet	ntdll		0x77d87094	
1	ZwUnmapViewOfSection	ntdll		0x77d869c4	
2	LdrpUnloadDll	ntdll		0x77d627fc	
3	LdrUnloadDll	ntdll		0x77d9c8b8	
4	FreeLibrary	KERNELBASE		0x76158be4	
5	QTimer::isSingleShot	Qt5Cored		0x5aceefc3	
6	QTimer::isSingleShot	Qt5Cored		0x5aceee18	
7	QTimer::isSingleShot	Qt5Cored		0x5ace63b9	
8	QTimer::isSingleShot	Qt5Cored		0x5ace5d6b	
9	QCss::StyleSelector::selectorMatches	Qt5Guid		0x5c961b36	
10	QCss::StyleSelector::selectorMatches	Qt5Guid		0x5c961a94	
11	QCss::StyleSelector::selectorMatches	Qt5Guid		0x5c96dd66	
12	QCss::StyleSelector::selectorMatches	Qt5Guid		0x5c96dcbe	
13	QCss::StyleSelector::selectorMatches	Qt5Guid		0x5c96e8ca	
14	QWidget::normalGeometry	Qt5Widgetsd		0x5d6d5030	
15	QTimer::isSingleShot	Qt5Cored		0x5acf7f78	
16	QTimer::isSingleShot	Qt5Cored		0x5acf7dbc	
17	QCss::StyleSelector::selectorMatches	Qt5Guid		0x5c96cd94	
18	QWidget::normalGeometry	Qt5Widgetsd		0x5d65b7bc	
19	main	main.cpp	11	0x131205
20	WinMain	qtmain_win.cpp	131	0x1335aa	
21	__tmainCRTStartup	crtexe.c	547	0x132ae0	
22	WinMainCRTStartup	crtexe.c	371	0x13286f	
23	BaseThreadInitThunk	kernel32		0x77bfed6c	
24	__RtlUserThreadStart	ntdll		0x77da377b	
25	_RtlUserThreadStart	ntdll		0x77da374e	








======================= THE CDB LOG =======================
/* note that these s/d in the beginning of the lines are placed by the Copy operation! */

===========================================================
sStarting debugger "CdbEngine" for ABI "x86-windows-msvc2010-pe-32bit"...
dStart parameters: 'untitled1' mode: 1
dABI: x86-windows-msvc2010-pe-32bit
dLanguages: c++ 
dExecutable: P:\CPP\build-untitled1-Desktop_Qt_5_0_2_MSVC2010_32bit-Debug\debug\untitled1 
dDirectory: P:\CPP\build-untitled1-Desktop_Qt_5_0_2_MSVC2010_32bit-Debug
dDebugger: C:\Program Files\Debugging Tools for Windows (x86)\cdb.exe
dProject: P:\CPP\untitled1 (built: P:\CPP\build-untitled1-Desktop_Qt_5_0_2_MSVC2010_32bit-Debug)
dQML server: 127.0.0.1:3768
dRemote: :0
dSysroot: 
dDebug Source Location: /usr/src/debug/qt5base/src/corelib:/usr/src/debug/qt5base/src/gui:/usr/src/debug/qt5base/src/network:/usr/src/debug/qt5base/src/v8:/usr/src/debug/qt5declarative/src/qml
dSymbol file: 
dDumper libraries:  P:\Qt\Qt5.0.2\5.0.2\msvc2010\\qtc-debugging-helper\ P:\Qt\Qt5.0.2\Tools\QtCreator\qtc-debugging-helper\2254931821\ C:\Users\Pesho\AppData\Local\QtProject\QtCreator\qtc-debugging-helper\2254931821\
dDebugger settings: 
dCloseBuffersOnExit: false  (default: false)
dRegisterForPostMortem: false  (default: false)
dLoadGdbInit: true  (default: true)
dUseAddressInBreakpointsView: false  (default: false)
dUseAddressInStackView: true  (default: false)  ***
dUseToolTipsInBreakpointsView: false  (default: false)
dUseToolTips: true  (default: false)  ***
dUseToolTipsInLocalsView: true  (default: false)  ***
dTargetAsync: false  (default: false)
dWarnOnReleaseBuilds: true  (default: true)
dAutoEnrichParameters: false  (default: true)  ***
dUseDynamicType: true  (default: true)
dGdbPostAttachCommands:   (default: )
dWatchdogTimeout: 20  (default: 20)
dAttemptQuickStart: false  (default: false)
dGdbStartupCommands:   (default: )
dShowStandardNamespace: true  (default: true)
dShowQtNamespace: true  (default: true)
dAlwaysAdjustStackColumnWidths: false  (default: false)
dMaximalStackDepth: 20  (default: 20)
dMultiInferior: false  (default: false)
dIntelFlavor: false  (default: false)
dEnableReverseDebugging: false  (default: false)
dListSourceFiles: false  (default: false)
dSkipKnownFrames: true  (default: false)  ***
dAlwaysAdjustLocalsColumnWidths: false  (default: false)
dMaximalStringLength: 10000  (default: 10000)
dSortStructMembers: true  (default: true)
dAutoDerefPointers: true  (default: true)
dBreakOnThrow: false  (default: false)
dBreakOnCatch: false  (default: false)
dNoPluginBreakpoints: false  (default: false)
dSelectedPluginBreakpointsPattern: .*  (default: .*)
dAdjustBreakpointLocations: true  (default: true)
dAlwaysAdjustBreakpointsColumnWidths: false  (default: false)
dAllPluginBreakpoints: true  (default: true)
dSelectedPluginBreakpoints: false  (default: false)
dAlwaysAdjustModulesColumnWidths: false  (default: false)
dShowQmlObjectTree: false  (default: true)  ***
dAlwaysAdjustSnapshotsColumnWidths: false  (default: false)
dAlwaysAdjustThreadsColumnWidths: false  (default: false)
dBreakOnAbort: true  (default: false)  ***
dAlwaysAdjustRegistersColumnWidths: false  (default: false)
dBreakOnWarning: false  (default: false)
dBreakOnFatal: true  (default: false)  ***
dLogTimeStamps: false  (default: false)
dVerboseLog: false  (default: false)
dAutoQuit: false  (default: false)
dFontSizeFollowsEditor: false  (default: false)
dUseMessageBoxForSignals: true  (default: true)
dUseAlternatingRowColours: true  (default: false)  ***
dUseCodeModel: true  (default: true)
dShowThreadNames: true  (default: false)  ***
dQmlInspector.ShowAppOnTop: false  (default: false)
dRaiseOnInterrupt: true  (default: true)
dQmlInspector.FromQml: false  (default: false)
dUseDebuggingHelper: true  (default: true)
dSwitchModeOnExit: true  (default: false)  ***
dBreakpointsFullPath: false  (default: false)
dState changed from DebuggerNotReady(0) to EngineSetupRequested(1) [master]
dQUEUE: SETUP ENGINE
dCALL: SETUP ENGINE
 Launching C:\Program Files\Debugging Tools for Windows (x86)\cdb.exe -aqtcreatorcdbext.dll -lines -G -c .idle_cmd !qtcreatorcdbext.idle -y http://msdl.microsoft.com/download/symbols P:\CPP\build-untitled1-Desktop_Qt_5_0_2_MSVC2010_32bit-Debug\debug\untitled1
 using P:\Qt\Qt5.0.2\Tools\QtCreator\lib\qtcreatorcdbext32\qtcreatorcdbext.dll of 31.5.2013 ã. 19:08:47 ÷..
 C:\Program Files\Debugging Tools for Windows (x86)\cdb.exe running as 5292
 Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
 Copyright (c) Microsoft Corporation. All rights reserved.
 CommandLine: P:\CPP\build-untitled1-Desktop_Qt_5_0_2_MSVC2010_32bit-Debug\debug\untitled1
 Symbol search path is: http://msdl.microsoft.com/download/symbols
 Executable search path is: 
 ModLoad: 01160000 01171000   untitled1.exe
 ModLoad: 77d40000 77e7c000   ntdll.dll
 ModLoad: 77bb0000 77c84000   C:\Windows\system32\kernel32.dll
 ModLoad: 76150000 7619b000   C:\Windows\system32\KERNELBASE.dll
 ModLoad: 5d6b0000 5de1c000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Widgetsd.dll
 ModLoad: 76f60000 77baa000   C:\Windows\system32\SHELL32.dll
 ModLoad: 77c90000 77d3c000   C:\Windows\system32\msvcrt.dll
 ModLoad: 76570000 765c7000   C:\Windows\system32\SHLWAPI.dll
 ModLoad: 763b0000 763fe000   C:\Windows\system32\GDI32.dll
 ModLoad: 768f0000 769b9000   C:\Windows\system32\USER32.dll
 ModLoad: 765d0000 765da000   C:\Windows\system32\LPK.dll
 ModLoad: 77eb0000 77f4d000   C:\Windows\system32\USP10.dll
 ModLoad: 5d160000 5d6ab000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Guid.dll
 ModLoad: 5cbf0000 5ce48000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\libGLESv2d.dll
 ModLoad: 5c9e0000 5cbe7000   C:\Windows\system32\D3DCOMPILER_43.dll
 ModLoad: 56be0000 56c97000   C:\Windows\system32\MSVCP100D.dll
 ModLoad: 569b0000 56b22000   C:\Windows\system32\MSVCR100D.dll
 ModLoad: 5c300000 5c9d7000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Cored.dll
 ModLoad: 76e00000 76f5c000   C:\Windows\system32\ole32.dll
 ModLoad: 76600000 766a1000   C:\Windows\system32\RPCRT4.dll
 ModLoad: 764d0000 76570000   C:\Windows\system32\ADVAPI32.dll
 ModLoad: 77f50000 77f69000   C:\Windows\SYSTEM32\sechost.dll
 ModLoad: 76370000 763a5000   C:\Windows\system32\WS2_32.dll
 ModLoad: 77e80000 77e86000   C:\Windows\system32\NSI.dll
 ModLoad: 4a900000 4aa49000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\icuin49.dll
 ModLoad: 00290000 00397000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\icuuc49.dll
 ModLoad: 554e0000 56602000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\icudt49.dll
 ModLoad: 6ba00000 6babf000   C:\Windows\system32\MSVCR100.dll
 ModLoad: 6b8d0000 6b939000   C:\Windows\system32\MSVCP100.dll
 (1588.a48): Break instruction exception - code 80000003 (first chance)
 eax=00000000 ebx=00000000 ecx=0028f950 edx=77d87094 esi=fffffffe edi=00000000
 eip=77de054e esp=0028f96c ebp=0028f998 iopl=0         nv up ei pl zr na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
 ntdll!LdrpDoDebuggerBreak+0x2c:
 77de054e cc              int     3
 cdb: Reading initial command '.idle_cmd !qtcreatorcdbext.idle'
 Execute when idle: !qtcreatorcdbext.idle
 0:000>
<l+t
<l+s
dNOTE: ENGINE SETUP OK
dState changed from EngineSetupRequested(1) to EngineSetupOk(3) [master]
dQUEUE: SETUP INFERIOR
dState changed from EngineSetupOk(3) to InferiorSetupRequested(4) [master]
dQUEUE: SETUP INFERIOR
dCALL: SETUP INFERIOR
<bu1001 `untitled1!P:\CPP\untitled1\main.cpp:6`
<!qtcreatorcdbext.breakpoints -t 0 -v
<sxn 0x4000001f
<.asm source_line
<!qtcreatorcdbext.setparameter maxStringLength=10000 maxStackDepth=20
<!qtcreatorcdbext.pid -t 1
dATTEMPT SYNC
 Source options are 1:
      1/t - Step/trace by source line
 Source options are 5:
      1/t - Step/trace by source line
      4/s - List source code at prompt

 *** WARNING: Unable to verify checksum for untitled1.exe
 Obtained breakpoint 0x2fd138 (#1), at 0x11611c5, module: 'untitled1'
 All breakpoints have been resolved.
 Assembly options: source_line
 Qt Creator CDB extension version 2.7 (Qt 5 support) 32 bit built Apr  9 2013.
dTaking notice of pid 5512
dNOTE: INFERIOR SETUP OK
dState changed from InferiorSetupRequested(4) to InferiorSetupOk(6) [master]
dState changed from InferiorSetupOk(6) to EngineRunRequested(7) [master]
dQUEUE: RUN ENGINE
dCALL: RUN ENGINE
<bm /( QtCored4!qFatal
<bm /( Qt5Cored!QMessageLogger::fatal
<g
 No matching code symbols found, no breakpoints set.

 *** WARNING: Unable to verify checksum for P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Cored.dll
 *** ERROR: Symbol file could not be found.  Defaulted to export symbols for P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Cored.dll - 
   1: 5c31023a @!("Qt5Cored!QMessageLogger::fatal<no parameter info>"
dNOTE: ENGINE RUN AND INFERIOR RUN OK
sRunning.
dState changed from EngineRunRequested(7) to InferiorRunOk(11) [master]
 ModLoad: 765e0000 765ff000   C:\Windows\system32\IMM32.DLL
 ModLoad: 76400000 764cc000   C:\Windows\system32\MSCTF.dll
 ModLoad: 75e50000 75e5c000   C:\Windows\system32\cryptbase.dll
 Breakpoint 1001 hit
 eax=0028fcec ebx=7ffd5000 ecx=00000001 edx=008a6258 esi=00000000 edi=00000000
 eip=011611c5 esp=0028fcb8 ebp=0028fcf8 iopl=0         nv up ei pl nz na po nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000202
 >    6:     int i=0;
 untitled1!main+0x25:
     6 011611c5 c745cc00000000  mov     dword ptr [ebp-34h],0 ss:0023:0028fcc4=01163881
sStopped at breakpoint 1 (1) in thread 0.
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunOk(11) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 2 -D -e inspect,return,local,watch -c -W 0

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]
dNOTE: INFERIOR RUN OK
sRunning.
dState changed from InferiorRunRequested(10) to InferiorRunOk(11) [master]
 eax=0028fcec ebx=7ffd5000 ecx=00000001 edx=008a6258 esi=00000000 edi=00000000
 eip=011611cc esp=0028fcb8 ebp=0028fcf8 iopl=0         nv up ei pl nz na po nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000202
 >    7:     for(int i=0;i<4;++i)
 untitled1!main+0x2c:
     7 011611cc c745c800000000  mov     dword ptr [ebp-38h],0 ss:0023:0028fcc0=0028fcd4
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunOk(11) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 3 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 0

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]

dNOTE: INFERIOR RUN OK
sRunning.
dState changed from InferiorRunRequested(10) to InferiorRunOk(11) [master]
 eax=0028fcec ebx=7ffd5000 ecx=00000001 edx=008a6258 esi=00000000 edi=00000000
 eip=011611e4 esp=0028fcb8 ebp=0028fcf8 iopl=0         nv up ei ng nz ac pe cy
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000297
 >    9:         i+=3;
 untitled1!main+0x44:
     9 011611e4 8b4dc8          mov     ecx,dword ptr [ebp-38h] ss:0023:0028fcc0=00000000
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunOk(11) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 4 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 0

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]
dNOTE: INFERIOR RUN OK
sRunning.
dState changed from InferiorRunRequested(10) to InferiorRunOk(11) [master]
 eax=0028fcec ebx=7ffd5000 ecx=00000003 edx=008a6258 esi=00000000 edi=00000000
 eip=011611ed esp=0028fcb8 ebp=0028fcf8 iopl=0         nv up ei pl nz na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000206
 >   10:     }
 untitled1!main+0x4d:
    10 011611ed ebe6            jmp     untitled1!main+0x35 (011611d5)
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunOk(11) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 5 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 0

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]

dNOTE: INFERIOR RUN OK
sRunning.
dState changed from InferiorRunRequested(10) to InferiorRunOk(11) [master]
 eax=0028fcec ebx=7ffd5000 ecx=00000003 edx=008a6258 esi=00000000 edi=00000000
 eip=011611d5 esp=0028fcb8 ebp=0028fcf8 iopl=0         nv up ei pl nz na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000206
 >    7:     for(int i=0;i<4;++i)
 untitled1!main+0x35:
     7 011611d5 8b45c8          mov     eax,dword ptr [ebp-38h] ss:0023:0028fcc0=00000003
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunOk(11) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 6 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 0

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]
dNOTE: INFERIOR RUN OK
sRunning.
dState changed from InferiorRunRequested(10) to InferiorRunOk(11) [master]
 eax=00000004 ebx=7ffd5000 ecx=00000003 edx=008a6258 esi=00000000 edi=00000000
 eip=011611ef esp=0028fcb8 ebp=0028fcf8 iopl=0         nv up ei pl zr na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
 >   11:     QApplication a(argc, argv);
 untitled1!main+0x4f:
    11 011611ef 6802000500      push    50002h
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunOk(11) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 7 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 0

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]

dNOTE: INFERIOR RUN OK
sRunning.
dState changed from InferiorRunRequested(10) to InferiorRunOk(11) [master]
 ModLoad: 70070000 7007a000   P:\Qt\Qt5.0.2\5.0.2\msvc2010\plugins\platforms\qminimal.dll
 Breakpoint 1's offset expression evaluation failed.
 Check for invalid symbols or bad syntax.
 WaitForEvent failed, Win32 error 0n22
     "The device does not recognize the command."
 eax=0045eef4 ebx=0028f4d4 ecx=0028f4d4 edx=0045eeb8 esi=0045eeb8 edi=00000000
 eip=77d87094 esp=0028f490 ebp=0028f510 iopl=0         nv up ei pl zr na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
 ntdll!KiFastSystemCallRet:
        77d87094 c3              ret

 *** WARNING: Unable to verify checksum for P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Guid.dll
 *** ERROR: Symbol file could not be found.  Defaulted to export symbols for P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Guid.dll - 
 *** WARNING: Unable to verify checksum for P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Widgetsd.dll
 *** ERROR: Symbol file could not be found.  Defaulted to export symbols for P:\Qt\Qt5.0.2\5.0.2\msvc2010\bin\Qt5Widgetsd.dll - 
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunOk(11) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 8 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 19

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]
 Breakpoint 1's offset expression evaluation failed.
 Check for invalid symbols or bad syntax.
 WaitForEvent failed, Win32 error 0n22
     "The device does not recognize the command."
 eax=0045eef4 ebx=0028f4d4 ecx=0028f4d4 edx=0045eeb8 esi=0045eeb8 edi=00000000
 eip=77d87094 esp=0028f490 ebp=0028f510 iopl=0         nv up ei pl zr na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
 ntdll!KiFastSystemCallRet:
        77d87094 c3              ret
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunRequested(10) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 9 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 19

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]

 Breakpoint 1's offset expression evaluation failed.
 Check for invalid symbols or bad syntax.
 WaitForEvent failed, Win32 error 0n22
     "The device does not recognize the command."
 eax=0045eef4 ebx=0028f4d4 ecx=0028f4d4 edx=0045eeb8 esi=0045eeb8 edi=00000000
 eip=77d87094 esp=0028f490 ebp=0028f510 iopl=0         nv up ei pl zr na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
 ntdll!KiFastSystemCallRet:
        77d87094 c3              ret
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunRequested(10) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 10 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 19

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]

 Breakpoint 1's offset expression evaluation failed.
 Check for invalid symbols or bad syntax.
 WaitForEvent failed, Win32 error 0n22
     "The device does not recognize the command."
 eax=0045eef4 ebx=0028f4d4 ecx=0028f4d4 edx=0045eeb8 esi=0045eeb8 edi=00000000
 eip=77d87094 esp=0028f490 ebp=0028f510 iopl=0         nv up ei pl zr na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
 ntdll!KiFastSystemCallRet:
        77d87094 c3              ret
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunRequested(10) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 11 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 19

<p
dNOTE: INFERIOR RUN REQUESTED
sRun requested...
dState changed from InferiorStopOk(14) to InferiorRunRequested(10) [master]

 Breakpoint 1's offset expression evaluation failed.
 Check for invalid symbols or bad syntax.
 WaitForEvent failed, Win32 error 0n22
     "The device does not recognize the command."
 eax=0045eef4 ebx=0028f4d4 ecx=0028f4d4 edx=0045eeb8 esi=0045eeb8 edi=00000000
 eip=77d87094 esp=0028f490 ebp=0028f510 iopl=0         nv up ei pl zr na pe nc
 cs=001b  ss=0023  ds=0023  es=0023  fs=003b  gs=0000             efl=00000246
 ntdll!KiFastSystemCallRet:
        77d87094 c3              ret
sStopped: "unknown"
dNOTE: INFERIOR SPONTANEOUS STOP
sStopped.
dState changed from InferiorRunRequested(10) to InferiorStopOk(14) [master]
<!qtcreatorcdbext.locals -t 12 -D -e inspect,return,local,watch -c -u "local.w,local.a" -W 19

dQUIT DEBUGGER REQUESTED IN STATE 14
dState changed from InferiorStopOk(14) to InferiorShutdownRequested(17) [master]
dQUEUE: SHUTDOWN INFERIOR
dCALL: SHUTDOWN INFERIOR
dINFERIOR SUCCESSFULLY SHUT DOWN
dState changed from InferiorShutdownRequested(17) to InferiorShutdownOk(19) [master]
dState changed from InferiorShutdownOk(19) to EngineShutdownRequested(20) [master]
dQUEUE: SHUTDOWN ENGINE
dCALL: SHUTDOWN ENGINE
<q
 CDB exited (0)
dNOTE: ENGINE SHUTDOWN OK
dState changed from EngineShutdownRequested(20) to EngineShutdownOk(22) [master]
dState changed from EngineShutdownOk(22) to DebuggerFinished(23) [master]
dQUEUE: FINISH DEBUGGER
dNOTE: FINISH DEBUGGER
dHANDLE RUNCONTROL FINISHED
sDebugger finished.

==================================================================================================